Angle grinder dust shroud for 45-degree cutting
COOL
Cutting ceramic tiles with an angle grinder goes with a lot of dust. Especially, a lot of dust is appeared when cutting ceramic tiles at an angle of 45 degrees, because more material is removed. The device for angle grinder DUSTER 45 completely solves the problem of dust removal, almost all the dust goes into the vacuum cleaner. In addition to removing dust, the device has two other huge advantages: -The system moves on a plastic support. There is no need to hold the angle grinder on weight for a long time, which relieves the hand. Much more work can be done without tiredness. -The accessory pipe has a window that allows visually control the cutting process and be sure that the process is going as it should.
100mm
3mm
Dry
Ceramic & Porcelain gres
3 PADS INSTEAD OF 7
Due to such properties, one blade number replaces three polishers of different grain sizes. For example, #1 replaces grains 30, 60, 120., #2 – 120, 200, 400., #3 – 400, 800, 1000. Its very convenient! The working surface of the blade must be sharpened with an abrasive material before the first use.
Polishing blade are made with an outer diameter of 100 mm and with three processing quality numbers: #1, #2, #3.
You may also like
